PC World Komputer 2010 April/PCWorld0410.iso/hity wydania/Ubuntu 9.10 PL/karmelkowy-koliberek-desktop-9.10-i386-PL.iso/casper/filesystem.squashfs/usr/include/linux/ixjuser.h

C/C++ Source or Header | 2009-10-16 | 25KB | 721 lines

#ifndef __LINUX_IXJUSER_H
#define __LINUX_IXJUSER_H

/******************************************************************************
 *
 *    ixjuser.h
 *
 * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
 * including the Internet PhoneJACK, Internet PhoneJACK Lite,
 * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
 * SmartCABLE
 *
 *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
 *
 *    This program is free software; you can redistribute it and/or
 *    modify it under the terms of the GNU General Public License
 *    as published by the Free Software Foundation; either version
 *    2 of the License, or (at your option) any later version.
 *
 * Author:          Ed Okerson, <[e-mail]>
 *
 * Contributors:    Greg Herlein, <[e-mail]>
 *                  David W. Erhart, <[e-mail]>
 *                  John Sellers, <[e-mail]>
 *                  Mike Preston, <[e-mail]>
 *
 * More information about the hardware related to this driver can be found
 * at our website:    http://www.quicknet.net
 *
 * Fixes:
 *
 * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
 * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
 * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 *
 *****************************************************************************/

#include <linux/telephony.h>


/******************************************************************************
*
* IOCTL's used for the Quicknet Telephony Cards
*
* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
* reset the SRAM values before futher use.
*
******************************************************************************/

#define IXJCTL_DSP_RESET         _IO  ('q', 0xC0)

#define IXJCTL_RING                     PHONE_RING
#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
#define IXJCTL_MAXRINGS            PHONE_MAXRINGS
#define IXJCTL_RING_CADENCE        PHONE_RING_CADENCE
#define IXJCTL_RING_START        PHONE_RING_START
#define IXJCTL_RING_STOP        PHONE_RING_STOP

#define IXJCTL_CARDTYPE            _IOR ('q', 0xC1, int)
#define IXJCTL_SERIAL            _IOR ('q', 0xC2, int)
#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
#define IXJCTL_VERSION                  _IOR ('q', 0xDA, char *)
#define IXJCTL_DSP_IDLE            _IO  ('q', 0xC5)
#define IXJCTL_TESTRAM            _IO  ('q', 0xC6)

/******************************************************************************
*
* This group of IOCTLs deal with the record settings of the DSP
*
* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
* Setting a lower depth reduces latency, but increases the demand of the
* application to service the driver without frame loss.  The DSP has 480
* bytes of physical buffer memory for the record channel so the true
* maximum limit is determined by how many frames will fit in the buffer.
*
* 1 uncompressed (480 byte) 16-bit linear frame.
* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
* 15 TrueSpeech 8.5 frames.
* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
*
* The default in the driver is currently set to 2 frames.
*
* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
* against over-scaling, if the multiplication factor times the input
* signal exceeds 16 bits, overflow distortion will occur.  The default
* setting is 0x100 (1.0).
*
* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
* the most recently recorded frame as a 16 bit value.
******************************************************************************/

#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
#define IXJCTL_REC_START                PHONE_REC_START
#define IXJCTL_REC_STOP                 PHONE_REC_STOP
#define IXJCTL_REC_DEPTH        PHONE_REC_DEPTH
#define IXJCTL_FRAME            PHONE_FRAME
#define IXJCTL_REC_VOLUME        PHONE_REC_VOLUME
#define IXJCTL_REC_LEVEL        PHONE_REC_LEVEL

typedef enum {
    f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
    f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
    f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
    f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
    f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
    f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
    f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
    f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
    lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
} IXJ_FILTER_FREQ;

typedef struct {
    unsigned int filter;
    IXJ_FILTER_FREQ freq;
    char enable;
} IXJ_FILTER;

typedef struct {
    char enable;
    char en_filter;
    unsigned int filter;
    unsigned int on1;
    unsigned int off1;
    unsigned int on2;
    unsigned int off2;
    unsigned int on3;
    unsigned int off3;
} IXJ_FILTER_CADENCE;

#define IXJCTL_SET_FILTER        _IOW ('q', 0xC7, IXJ_FILTER *)
#define IXJCTL_SET_FILTER_RAW        _IOW ('q', 0xDD, IXJ_FILTER_RAW *)
#define IXJCTL_GET_FILTER_HIST        _IOW ('q', 0xC8, int)
#define IXJCTL_FILTER_CADENCE        _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
#define IXJCTL_PLAY_CID            _IO  ('q', 0xD7)
/******************************************************************************
*
* This IOCTL allows you to reassign values in the tone index table.  The
* tone table has 32 entries (0 - 31), but the driver only allows entries
* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
* The positions used internally for Call Progress Tones are as follows:
*    Dial Tone   - 25
*    Ring Back   - 26
*    Busy Signal - 27
*
* The freq values are calculated as:
* freq = cos(2 * PI * frequency / 8000)
*
* The most commonly needed values are already calculated and listed in the
* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
* different gains, if you are only using a single frequency set the unused
* one to 0.
*
* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
* increments.
*
******************************************************************************/

typedef enum {
    hz20 = 0x7ffa,
    hz50 = 0x7fe5,
    hz133 = 0x7f4c,
    hz200 = 0x7e6b,
    hz261 = 0x7d50,        /* .63 C1  */
    hz277 = 0x7cfa,        /* .18 CS1 */
    hz293 = 0x7c9f,        /* .66 D1  */
    hz300 = 0x7c75,
    hz311 = 0x7c32,        /* .13 DS1 */
    hz329 = 0x7bbf,        /* .63 E1  */
    hz330 = 0x7bb8,
    hz340 = 0x7b75,
    hz349 = 0x7b37,        /* .23 F1  */
    hz350 = 0x7b30,
    hz360 = 0x7ae9,
    hz369 = 0x7aa8,        /* .99 FS1 */
    hz380 = 0x7a56,
    hz392 = 0x79fa,        /* .00 G1  */
    hz400 = 0x79bb,
    hz415 = 0x7941,        /* .30 GS1 */
    hz420 = 0x7918,
    hz425 = 0x78ee,
    hz435 = 0x7899,
    hz440 = 0x786d,        /* .00 A1  */
    hz445 = 0x7842,
    hz450 = 0x7815,
    hz452 = 0x7803,
    hz466 = 0x7784,        /* .16 AS1 */
    hz475 = 0x7731,
    hz480 = 0x7701,
    hz493 = 0x7685,        /* .88 B1  */
    hz494 = 0x767b,
    hz500 = 0x7640,
    hz520 = 0x7578,
    hz523 = 0x7559,        /* .25 C2  */
    hz525 = 0x7544,
    hz540 = 0x74a7,
    hz554 = 0x7411,        /* .37 CS2 */
    hz587 = 0x72a1,        /* .33 D2  */
    hz590 = 0x727f,
    hz600 = 0x720b,
    hz620 = 0x711e,
    hz622 = 0x7106,        /* .25 DS2 */
    hz659 = 0x6f3b,        /* .26 E2  */
    hz660 = 0x6f2e,
    hz698 = 0x6d3d,        /* .46 F2  */
    hz700 = 0x6d22,
    hz739 = 0x6b09,        /* .99 FS2 */
    hz740 = 0x6afa,
    hz750 = 0x6a6c,
    hz770 = 0x694b,
    hz783 = 0x688b,        /* .99 G2  */
    hz800 = 0x678d,
    hz816 = 0x6698,
    hz830 = 0x65bf,        /* .61 GS2 */
    hz850 = 0x6484,
    hz857 = 0x6414,
    hz880 = 0x629f,        /* .00 A2  */
    hz900 = 0x6154,
    hz932 = 0x5f35,        /* .33 AS2 */
    hz935 = 0x5f01,
    hz941 = 0x5e9a,
    hz942 = 0x5e88,
    hz950 = 0x5dfd,
    hz975 = 0x5c44,
    hz1000 = 0x5a81,
    hz1020 = 0x5912,
    hz1050 = 0x56e2,
    hz1100 = 0x5320,
    hz1140 = 0x5007,
    hz1200 = 0x4b3b,
    hz1209 = 0x4a80,
    hz1215 = 0x4a02,
    hz1250 = 0x471c,
    hz1300 = 0x42e0,
    hz1330 = 0x4049,
    hz1336 = 0x3fc4,
    hz1366 = 0x3d22,
    hz1380 = 0x3be4,
    hz1400 = 0x3a1b,
    hz1450 = 0x3596,
    hz1477 = 0x331c,
    hz1500 = 0x30fb,
    hz1600 = 0x278d,
    hz1633 = 0x2462,
    hz1638 = 0x23e7,
    hz1645 = 0x233a,
    hz1750 = 0x18f8,
    hz1800 = 0x1405,
    hz1860 = 0xe0b,
    hz2100 = 0xf5f6,
    hz2130 = 0xf2f5,
    hz2450 = 0xd3b3,
    hz2750 = 0xb8e4
} IXJ_FREQ;

typedef enum {
    C1 = hz261,
    CS1 = hz277,
    D1 = hz293,
    DS1 = hz311,
    E1 = hz329,
    F1 = hz349,
    FS1 = hz369,
    G1 = hz392,
    GS1 = hz415,
    A1 = hz440,
    AS1 = hz466,
    B1 = hz493,
    C2 = hz523,
    CS2 = hz554,
    D2 = hz587,
    DS2 = hz622,
    E2 = hz659,
    F2 = hz698,
    FS2 = hz739,
    G2 = hz783,
    GS2 = hz830,
    A2 = hz880,
    AS2 = hz932,
} IXJ_NOTE;

typedef struct {
    int tone_index;
    int freq0;
    int gain0;
    int freq1;
    int gain1;
} IXJ_TONE;

#define IXJCTL_INIT_TONE        _IOW ('q', 0xC9, IXJ_TONE *)

/******************************************************************************
*
* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
* Call Progress Tones (CPT).  This is accomplished by setting up an array of
* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
* the tone sequence.  The tone_on_time and tone_off time are in
* 250 microsecond intervals.  A pointer to this array is passed to the
* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
* termination variable defines what to do at the end of a cadence, the
* options are to play the cadence once and stop, to repeat the last
* element of the cadence indefinitely, or to repeat the entire cadence
* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
* structures.  If the freq0 variable is non-zero, the tone table contents
* for the tone_index are updated to the frequencies and gains defined.  It
* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
* table indexes are used in a cadence the frequency and gain variables will
* be ignored.
*
* If the array elements contain frequency parameters the driver will
* initialize the needed tone table elements and begin playing the tone,
* there is no preset limit on the number of elements in the cadence.  If
* there is more than one frequency used in the cadence, sequential elements
* of different frequencies MUST use different tone table indexes.  Only one
* cadence can be played at a time.  It is possible to build complex
* cadences with multiple frequencies using 2 tone table indexes by
* alternating between them.
*
******************************************************************************/

typedef struct {
    int index;
    int tone_on_time;
    int tone_off_time;
    int freq0;
    int gain0;
    int freq1;
    int gain1;
} IXJ_CADENCE_ELEMENT;

typedef enum {
    PLAY_ONCE,
    REPEAT_LAST_ELEMENT,
    REPEAT_ALL
} IXJ_CADENCE_TERM;

typedef struct {
    int elements_used;
    IXJ_CADENCE_TERM termination;
    IXJ_CADENCE_ELEMENT *ce;
} IXJ_CADENCE;

#define IXJCTL_TONE_CADENCE        _IOW ('q', 0xCA, IXJ_CADENCE *)
/******************************************************************************
*
* This group of IOCTLs deal with the playback settings of the DSP
*
******************************************************************************/

#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
#define IXJCTL_PLAY_START               PHONE_PLAY_START
#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
#define IXJCTL_PLAY_DEPTH        PHONE_PLAY_DEPTH
#define IXJCTL_PLAY_VOLUME        PHONE_PLAY_VOLUME
#define IXJCTL_PLAY_LEVEL        PHONE_PLAY_LEVEL

/******************************************************************************
*
* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
* of the DSP
*
* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
******************************************************************************/
#define IXJCTL_AEC_START        _IOW ('q', 0xCB, int)
#define IXJCTL_AEC_STOP            _IO  ('q', 0xCC)
#define IXJCTL_AEC_GET_LEVEL        _IO  ('q', 0xCD)

#define AEC_OFF   0
#define AEC_LOW   1
#define AEC_MED   2
#define AEC_HIGH  3
#define AEC_AUTO  4
#define AEC_AGC   5
/******************************************************************************
*
* Call Progress Tones, DTMF, etc.
* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
* only.  If you pass a 1, DTMF is suppressed from the audio stream.
* Tone on and off times are in 250 microsecond intervals so
* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
* will set the tone on time of board ixj1 to 360 * 250us = 90ms
* the default values of tone on and off times is 840 or 210ms
******************************************************************************/

#define IXJCTL_DTMF_READY        PHONE_DTMF_READY
#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
#define IXJCTL_DTMF_OOB            PHONE_DTMF_OOB
#define IXJCTL_EXCEPTION        PHONE_EXCEPTION
#define IXJCTL_PLAY_TONE        PHONE_PLAY_TONE
#define IXJCTL_SET_TONE_ON_TIME        PHONE_SET_TONE_ON_TIME
#define IXJCTL_SET_TONE_OFF_TIME    PHONE_SET_TONE_OFF_TIME
#define IXJCTL_GET_TONE_ON_TIME        PHONE_GET_TONE_ON_TIME
#define IXJCTL_GET_TONE_OFF_TIME    PHONE_GET_TONE_OFF_TIME
#define IXJCTL_GET_TONE_STATE        PHONE_GET_TONE_STATE
#define IXJCTL_BUSY            PHONE_BUSY
#define IXJCTL_RINGBACK            PHONE_RINGBACK
#define IXJCTL_DIALTONE            PHONE_DIALTONE
#define IXJCTL_CPT_STOP            PHONE_CPT_STOP

/******************************************************************************
* LineJACK specific IOCTLs
*
* The lsb 4 bits of the LED argument represent the state of each of the 4
* LED's on the LineJACK
******************************************************************************/

#define IXJCTL_SET_LED            _IOW ('q', 0xCE, int)
#define IXJCTL_MIXER            _IOW ('q', 0xCF, int)

/******************************************************************************
*
* The master volume controls use attenuation with 32 levels from 0 to -62dB
* with steps of 2dB each, the defines should be OR'ed together then sent
* as the parameter to the mixer command to change the mixer settings.
*
******************************************************************************/
#define MIXER_MASTER_L        0x0000
#define MIXER_MASTER_R        0x0100
#define ATT00DB            0x00
#define ATT02DB            0x01
#define ATT04DB            0x02
#define ATT06DB            0x03
#define ATT08DB            0x04
#define ATT10DB            0x05
#define ATT12DB            0x06
#define ATT14DB            0x07
#define ATT16DB            0x08
#define ATT18DB            0x09
#define ATT20DB            0x0A
#define ATT22DB            0x0B
#define ATT24DB            0x0C
#define ATT26DB            0x0D
#define ATT28DB            0x0E
#define ATT30DB            0x0F
#define ATT32DB            0x10
#define ATT34DB            0x11
#define ATT36DB            0x12
#define ATT38DB            0x13
#define ATT40DB            0x14
#define ATT42DB            0x15
#define ATT44DB            0x16
#define ATT46DB            0x17
#define ATT48DB            0x18
#define ATT50DB            0x19
#define ATT52DB            0x1A
#define ATT54DB            0x1B
#define ATT56DB            0x1C
#define ATT58DB            0x1D
#define ATT60DB            0x1E
#define ATT62DB            0x1F
#define MASTER_MUTE        0x80

/******************************************************************************
*
* The input volume controls use gain with 32 levels from +12dB to -50dB
* with steps of 2dB each, the defines should be OR'ed together then sent
* as the parameter to the mixer command to change the mixer settings.
*
******************************************************************************/
#define MIXER_PORT_CD_L        0x0600
#define MIXER_PORT_CD_R        0x0700
#define MIXER_PORT_LINE_IN_L    0x0800
#define MIXER_PORT_LINE_IN_R    0x0900
#define MIXER_PORT_POTS_REC    0x0C00
#define MIXER_PORT_MIC        0x0E00

#define GAIN12DB        0x00
#define GAIN10DB        0x01
#define GAIN08DB        0x02
#define GAIN06DB        0x03
#define GAIN04DB        0x04
#define GAIN02DB        0x05
#define GAIN00DB        0x06
#define GAIN_02DB        0x07
#define GAIN_04DB        0x08
#define GAIN_06DB        0x09
#define GAIN_08DB        0x0A
#define GAIN_10DB        0x0B
#define GAIN_12DB        0x0C
#define GAIN_14DB        0x0D
#define GAIN_16DB        0x0E
#define GAIN_18DB        0x0F
#define GAIN_20DB        0x10
#define GAIN_22DB        0x11
#define GAIN_24DB        0x12
#define GAIN_26DB        0x13
#define GAIN_28DB        0x14
#define GAIN_30DB        0x15
#define GAIN_32DB        0x16
#define GAIN_34DB        0x17
#define GAIN_36DB        0x18
#define GAIN_38DB        0x19
#define GAIN_40DB        0x1A
#define GAIN_42DB        0x1B
#define GAIN_44DB        0x1C
#define GAIN_46DB        0x1D
#define GAIN_48DB        0x1E
#define GAIN_50DB        0x1F
#define INPUT_MUTE        0x80

/******************************************************************************
*
* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
* with steps of 4dB each, the defines should be OR'ed together then sent
* as the parameter to the mixer command to change the mixer settings.
*
******************************************************************************/
#define MIXER_PORT_POTS_PLAY    0x0F00

#define POTS_ATT_00DB        0x00
#define POTS_ATT_04DB        0x01
#define POTS_ATT_08DB        0x02
#define POTS_ATT_12DB        0x03
#define POTS_ATT_16DB        0x04
#define POTS_ATT_20DB        0x05
#define POTS_ATT_24DB        0x06
#define POTS_ATT_28DB        0x07
#define POTS_MUTE        0x80

/******************************************************************************
*
* The DAA controls the interface to the PSTN port.  The driver loads the
* US coefficients by default, so if you live in a different country you
* need to load the set for your countries phone system.
*
******************************************************************************/
#define IXJCTL_DAA_COEFF_SET        _IOW ('q', 0xD0, int)

#define DAA_US         1    /*PITA 8kHz */
#define DAA_UK         2    /*ISAR34 8kHz */
#define DAA_FRANCE     3    /* */
#define DAA_GERMANY    4
#define DAA_AUSTRALIA    5
#define DAA_JAPAN    6

/******************************************************************************
*
* Use IXJCTL_PORT to set or query the port the card is set to.  If the
* argument is set to PORT_QUERY, the return value of the ioctl will
* indicate which port is currently in use, otherwise it will change the
* port.
*
******************************************************************************/
#define IXJCTL_PORT            _IOW ('q', 0xD1, int)

#define PORT_QUERY    0
#define PORT_POTS    1
#define PORT_PSTN    2
#define PORT_SPEAKER    3
#define PORT_HANDSET    4

#define IXJCTL_PSTN_SET_STATE        PHONE_PSTN_SET_STATE
#define IXJCTL_PSTN_GET_STATE        PHONE_PSTN_GET_STATE

#define PSTN_ON_HOOK    0
#define PSTN_RINGING    1
#define PSTN_OFF_HOOK    2
#define PSTN_PULSE_DIAL    3

/******************************************************************************
*
* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR),
* and the transmit gain (AGX).  OR together the components and pass them
* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
*
******************************************************************************/
#define IXJCTL_DAA_AGAIN        _IOW ('q', 0xD2, int)

#define AGRR00DB    0x00    /* Analog gain in receive direction 0dB */
#define AGRR3_5DB    0x10    /* Analog gain in receive direction 3.5dB */
#define AGRR06DB    0x30    /* Analog gain in receive direction 6dB */

#define AGX00DB        0x00    /* Analog gain in transmit direction 0dB */
#define AGX_6DB        0x04    /* Analog gain in transmit direction -6dB */
#define AGX3_5DB    0x08    /* Analog gain in transmit direction 3.5dB */
#define AGX_2_5B    0x0C    /* Analog gain in transmit direction -2.5dB */

#define IXJCTL_PSTN_LINETEST        _IO  ('q', 0xD3)

#define IXJCTL_CID            _IOR ('q', 0xD4, PHONE_CID *)
#define IXJCTL_VMWI            _IOR ('q', 0xD8, int)
#define IXJCTL_CIDCW            _IOW ('q', 0xD9, PHONE_CID *)
/******************************************************************************
*
* The wink duration is tunable with this ioctl.  The default wink duration
* is 320ms.  You do not need to use this ioctl if you do not require a
* different wink duration.
*
******************************************************************************/
#define IXJCTL_WINK_DURATION        PHONE_WINK_DURATION

/******************************************************************************
*
* This ioctl will connect the POTS port to the PSTN port on the LineJACK
* In order for this to work properly the port selection should be set to
* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
* enable conference calls between PSTN callers and network callers.
* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
* passing a 0 turns it back off.
*
******************************************************************************/
#define IXJCTL_POTS_PSTN        _IOW ('q', 0xD5, int)

/******************************************************************************
*
* IOCTLs added by request.
*
* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
*           /usr/include/asm/param.h, this determines the fundamental
*           frequency of the clock ticks on your Linux system.  The kernel
*           must be rebuilt if you change this value, also all modules you
*           use (except this one) must be recompiled.  The default value
*           is 100, and you only need to use this IOCTL if you use some
*           other value.
*
*
* IXJCTL_RATE sets the number of times per second that the driver polls
*             the DSP.  This value cannot be larger than HZ.  By
*             increasing both of these values, you may be able to reduce
*             latency because the max hang time that can exist between the
*             driver and the DSP will be reduced.
*
******************************************************************************/

#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
#define IXJCTL_FRAMES_READ        _IOR ('q', 0xE2, unsigned long)
#define IXJCTL_FRAMES_WRITTEN        _IOR ('q', 0xE3, unsigned long)
#define IXJCTL_READ_WAIT        _IOR ('q', 0xE4, unsigned long)
#define IXJCTL_WRITE_WAIT        _IOR ('q', 0xE5, unsigned long)
#define IXJCTL_DRYBUFFER_READ        _IOR ('q', 0xE6, unsigned long)
#define IXJCTL_DRYBUFFER_CLEAR        _IO  ('q', 0xE7)
#define IXJCTL_DTMF_PRESCALE        _IOW ('q', 0xE8, int)

/******************************************************************************
*
* This ioctl allows the user application to control what events the driver
* will send signals for, and what signals it will send for which event.
* By default, if signaling is enabled, all events will send SIGIO when
* they occur.  To disable signals for an event set the signal to 0.
*
******************************************************************************/
typedef enum {
    SIG_DTMF_READY,
    SIG_HOOKSTATE,
    SIG_FLASH,
    SIG_PSTN_RING,
    SIG_CALLER_ID,
    SIG_PSTN_WINK,
    SIG_F0, SIG_F1, SIG_F2, SIG_F3,
    SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
    SIG_READ_READY = 33,
    SIG_WRITE_READY = 34
} IXJ_SIGEVENT;

typedef struct {
    unsigned int event;
    int signal;
} IXJ_SIGDEF;

#define IXJCTL_SIGCTL            _IOW ('q', 0xE9, IXJ_SIGDEF *)

/******************************************************************************
*
* These ioctls allow the user application to change the gain in the
* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
*
* 11111 = +12 dB
* 10111 =   0 dB
* 00000 = -34.5 dB
*
* IXJCTL_SC_RXG sets the Receive gain
* IXJCTL_SC_TXG sets the Transmit gain
*
******************************************************************************/
#define IXJCTL_SC_RXG            _IOW ('q', 0xEA, int)
#define IXJCTL_SC_TXG            _IOW ('q', 0xEB, int)

/******************************************************************************
*
* The intercom IOCTL's short the output from one card to the input of the
* other and vice versa (actually done in the DSP read function).  It is only
* necessary to execute the IOCTL on one card, but it is necessary to have
* both devices open to be able to detect hook switch changes.  The record
* codec and rate of each card must match the playback codec and rate of
* the other card for this to work properly.
*
******************************************************************************/

#define IXJCTL_INTERCOM_START         _IOW ('q', 0xFD, int)
#define IXJCTL_INTERCOM_STOP          _IOW ('q', 0xFE, int)

/******************************************************************************
 *
 * new structure for accessing raw filter information
 *
 ******************************************************************************/

typedef struct {
    unsigned int filter;
    char enable;
    unsigned int coeff[19];
} IXJ_FILTER_RAW;

#endif